United Kingdom - Trade and Craft Qualifications (30/03/2015)
Level 3 Qualifications
Appendix 3 does not include Level 3 qualifications. Level 3 qualifications which are recognised as an exception under the Skilled Migrant Category are included in the List of Qualifications recognised as an Exception (Appendix 8).
City and Guilds of London Institute Craft Qualifications
The craft qualifications in Table A qualify for the points indicated where the qualification:
Table A
The qualifications awarded by the institutions listed below qualify for the points indicated.
Qualification |
Awarded from |
Level in NZ terms |
Points under SMC |
The Craft Certificate in (speciality will be named) |
1979 - 1992 |
4 |
40 |
The Part Two Certificate in (speciality will be named) Craft Studies |
1979 - 1989 |
4 |
|
(Name of speciality) Craft Studies Part 2 |
1979 - 1989 |
4 |
|
The Part Three Certificate in (speciality will be named) Craft Studies |
1990 - 2004 |
4 |
|
(Name of speciality) Craft Studies Part 3 |
1990 - 2004 |
4 |
If an applicant believes their qualification may be higher than the level stated they should apply to NZQA for an International Qualification Assessment.
Note:
- Award certificates must be provided in their original language.
- If any courses leading to the award of one of the qualifications listed above were studied at any institution outside of the United Kingdom, including any United Kingdom overseas campuses, they should be referred to NZQA for an International Qualification Assessment.
- If any courses have been cross-credited towards the listed qualifications, these qualifications also need to be referred to NZQA for an International Qualification Assessment, this includes all International City and Guilds International qualifications.
- All qualifications awarded after 2014 should be referred to NZQA for an International Qualification Assessment.
- For any purpose other than claiming the SMC points stated, evidence of completing a time-based apprenticeship from an appropriate awarding body, in a relevant occupation, is also likely to be required.
Trade Qualifications (Apprenticeships)
The qualifications in Table B qualify for the points indicated where:
Table B
Qualification |
Abbreviation* |
Country |
Level in NZ terms |
Points under SMC |
Advanced Apprenticeship |
AA |
England |
4 |
40 |
Advanced Level Apprenticeship |
ALA |
England |
4 |
40 |
Level 3 Apprenticeship |
AP |
Wales |
4 |
40 |
Apprenticeship NI (Level 3 Apprenticeship) |
ANI |
Northern Ireland |
4 |
40 |
Modern Apprenticeship |
MA |
Wales |
4 |
40 |
Vocational qualification (trade qualification title) at Level 3 / SVQ 3: (trade qualification title) |
SVQ3 |
Scotland |
4 |
40 |
* Abbreviations used are for the purposes of this list and may not be stated on the award certificates.
If an applicant believes their qualification may be higher than the level stated they should apply to the NZQA for an International Qualification Assessment.
Note:
- Award certificates must be provided in their original language.
- If any courses leading to the award of one of the qualifications listed above were studied at any institution outside of the United Kingdom, including any United Kingdom overseas campuses, they should be referred to NZQA for an International Qualification Assessment.
- If any courses which have been cross-credited towards the listed qualifications, these qualifications also need to be referred to NZQA for an International Qualification Assessment.
- All qualifications awarded after 2014 should be referred to NZQA for an International Qualification Assessment.
- For any purpose other than claiming the SMC points stated, evidence of completing a National Vocational Qualification (NVQ) at Level 3, a National Certificate awarded by BTEC or Edexcel, or a Certificate awarded by City and Guilds of London Institute at Level 3, is also likely to be required.
Table C
The following awarding bodies may award the qualifications specified from the dates shown.
Awarding body Previous names and dates of change are indicated in brackets. Names and dates of awarding bodies have been included in the List of Qualifications Exempt from Assessment for immigration purposes only. |
Qualification awarded from |
Automotive Skills
|
MA: 2003 - 2008 AA: 2005 - 2008 |
Cogent |
AA and MA: 2007 - 2011 ALA and AP: 2012 |
Construction Skills
|
MA: 2003 - 2011 AA: 2005 - 2011 ALA and AP: 2012 |
Creative Skill Set (Skillset 2004 - 2012)
|
MA: 2004 - 2011 ALA: 2014 AA: 2005 AP: 2012 |
Department for Employment and Learning |
ANI: 2004 |
Energy and Utility Skills
|
AA and MA: 2005 - 2011 ALA and AP: 2012 |
Engineering Construction Industry Training Board / ECITB
|
MA: 2003 - 2011 AA: 2005 - 2011 ALA and AP: 2012 |
Improve
|
MA: 2005 - 2011 ALA: 2014 AA: 2005 - 2013 AP: 2012 - 2014 |
IMI / The Institute of the Motor Industry
|
AA: 2008 - 2014 ALA: 2014 MA: 2008 - 2011 AP: 2012 |
Lantra
|
MA: 2005 - 2012 ALA: 2013 AA: 2005 - 2012 AP: 2013 |
People 1st |
AA and MA: 2005 - 2011 ALA and AP: 2012 |
People 1st for GoSkills (GoSkills 2004 - 2011) |
MA: 2004 - 2011 AA: 2005 - 2011 |
ProSkills
|
AA: 2005 - 2012 MA: 2005 - 2014 AP: 2014 ALA: 2012 |
Scottish Qualifications Authority / SQA |
SQV3: 2000 |
SEMTA
|
AA and MA: 2005 - 2011 ALA and AP: 2012 |
Summit Skills
|
AA and MA: 2005 - 2011 ALA and AP: 2012 |
Effective 30/03/2015